Setting up Routes on Collar
Routes in Collar helps pet businesses plan pick-up, drop-off, and mobile service runs. You start by creating Zones (route templates), then link each zone to a Vehicle and staff member so stops appear on the daily Routes board.
Overview
The Routes section in the sidebar has three tabs: Routes (the daily board), Zones (reusable route templates), and Vehicles. Zones define which pets and services belong on a run; vehicles put those zones on the road for a given day.
Prerequisites
- Access to Routes in the left-hand sidebar (available to most staff accounts; Accountants do not see Routes).
- The services and booking tags you want to use already set up in Collar, if you plan to filter which bookings appear on a zone.
- Staff members available to assign on vehicle routes.
How to Create a Zone
- From the left-hand sidebar, open Routes.
- Select the Zones tab.
- Click the (+) button in the top right and choose New Route.
- In the window, open the Settings tab and fill in:
- Route Name — for example “West London – Pick-up”.
- Zone/Area — pick an existing area from the list, or type a new name (for example “London”) and create it.
- Sort Index — controls the order this zone’s route appears on the daily Routes board.
- Color — shown next to the route on the board.
- Start Time — for example 08:00 for a morning pick-up run.
- Job Duration — typical length of each stop (for example 10).
- Under Services, select the services that should pull pets onto this route when booked (for example Daycare). You need at least one Service or Appointment Tag to save.
- (Optional) Add Appointment Tags to narrow further — for example service Daycare and tag Pick-up means only Daycare bookings with the Pick-up tag appear. If you set both services and tags, a booking must match both.
- On the Pets tab, add at least one pet and assign each pet a job (required to save).
- Click Save.
How to Add Pets to a Zone
- In the zone window, open the Pets tab.
- Search by pet name, owner name, email, area code, or tag.
- Tick the pets you want, then click Add Selected Pets.
- Assign each pet a job (for example Pick-up or Drop-off). Optionally set a number beside each name to control order on the run.
How to Add a Vehicle
Zones alone do not put stops on the daily Routes board. Link each zone to a vehicle (and staff) so the day’s board can build.
- Open Routes, then the Vehicles tab.
- Click the (+) button in the top right and choose New Vehicle.
- Under Settings, fill in:
- Vehicle Name
- Vehicle Type — Van or Mini Van only
- Status — In Service or Out of Service
- Plate Number
- Colour — identifies the vehicle on the daily Routes board
- Capacity — pet counts by size: General, Small, Medium, and Large
How to Assign Zones to a Vehicle
- In the vehicle window, open the Routes section and click Add New Route.
- Select the zone (route template) this vehicle should run.
- Assign one or more staff under Staff Member.
- (Optional) Set Start Address (Optional) and End Address (Optional). If you leave these blank, Collar uses the branch address.
- Repeat for additional zones on the same vehicle if needed, then click Save.
A vehicle needs at least one route with a zone and at least one staff member before it can be saved.
Important Notes, Tips & Warnings
- Tip: To add a new area, use the Zone/Area field on the zone Settings tab — type the name and create it. There is no separate Area screen.
- Note: A zone is a template. Stops only show on the daily Routes board after the zone is linked to a vehicle with staff assigned.
- Note: Saving a zone requires at least one pet with a job assigned, plus at least one matching Service or Appointment Tag.
- Note: Stops on the daily Routes board only appear when the pet is on that zone, the booking for that day is Confirmed, and the booking matches the zone’s services and tags (if you set both, both must match).
Troubleshooting
Issue: I can’t find where to add a zone area.
Resolution: Open Routes → Zones → New Route (or edit an existing zone) → Settings. Use the Zone/Area dropdown: select an existing area or type a new name to create one.
Issue: My zone is saved but nothing appears on the daily Routes board.
Resolution: Link the zone under Vehicles → open the vehicle → Add New Route, assign a staff member, confirm the pet is on the zone’s Pets list, and confirm bookings for that day are Confirmed and match the zone’s services or tags.
Issue: I can’t save the zone.
Resolution: Check required fields: Route Name, Zone/Area, Sort Index, Color, Start Time, and Job Duration; at least one Service or Appointment Tag; and at least one pet on the Pets tab with a job assigned.
Issue: I can’t save the vehicle.
Resolution: Fill in all Settings fields, then add at least one route with a zone and at least one staff member under Add New Route.