Skip to content Skip to main navigation Skip to footer

How to Optimize Daily Pickup and Drop-off Routes in Collar

This article explains how to review the day’s pickup and drop-off stops, reorder them into the fastest traffic-aware sequence, and track progress while the vehicle is on the road.

Overview

Collar’s Routes section builds a daily board from your confirmed bookings: each vehicle and route pairing becomes a column of stops for the selected date. From there you can move stops between routes by hand, or hand the whole sequence to Collar’s optimizer, which asks Google’s routing service for the fastest driving order given current traffic.

Optimizing writes three things back to the route: the new stop order, an ETA for every stop, and a total distance and drive time for the route. Drivers then work the list top to bottom, marking each stop On Route and Completed as they go.

The section has three tabs: Routes (the daily board), Zones (route templates), and Vehicles.

Prerequisites

  • Access to Routes in the left-hand sidebar. This is available to all business users — it is not restricted to Admins.
  • At least one zone created on the Zones tab (Route Name, Zone/Area, Sort Index, Color, Start Time, Job Duration, and optionally Services and Appointment Tags).
  • At least one vehicle on the Vehicles tab with that route assigned, a staff member attached, and optionally a Start Address and End Address. Routes with no start/end address fall back to your branch address, so the branch must have coordinates set.
  • Bookings for the day must be Confirmed — pending and requested bookings do not appear on the board — and the client’s address must geocode successfully.

How to Optimize a Day’s Route

  1. From the left-hand navigation sidebar, click Routes, then open the Routes tab. Use the date navigation at the top to select the day you’re planning.
  2. Review the board. Each column is one vehicle running one route, headed by the vehicle name, route name, and start time. Use the toolbar filters to narrow to specific routes or vehicles, and the switch in the toolbar to flip between list view and map view.
  3. Make any manual adjustments first. Drag a pet card up or down inside a column to reorder it, or drag it onto another column to move it to that route. In map view, right-click a pin and choose the route to move it to. Changes save immediately.
  4. Open the route you want to optimize to reach its run sheet — the stop list alongside the live map.
  5. Click the ⋮ Options menu in the route header and choose Get Optimal Route. Confirm with Optimise. Collar reorders the stops on the latest traffic data, then saves the new sequence, per-stop ETAs, and the route’s total distance and duration (shown as a 12.4km, 47min chip under the route name).
  6. When the driver is ready to set off, use Start Journey on the Start Address card. Collar asks whether to optimize against current traffic: choose Optimise to reorder from the current time, or No Thanks to keep the existing order and simply calculate ETAs.
  7. While the route is running, use Recalculate ETA in the ⋮ Options menu to refresh the arrival times against current traffic without reshuffling the stops.


Important Notes & Best Practices

  • Optimize close to departure. ETAs are always calculated from the current time, not from the route’s configured start time. Optimizing the night before produces an order and arrival times based on last night’s traffic, not tomorrow morning’s. Re-run Get Optimal Route (or use the prompt on Start Journey) shortly before the vehicle leaves.
  • Build in slack for job time. The Job Duration you set on a zone is a planning value; it is not added to the per-stop ETAs, so a route with many short stops will run later than the ETAs suggest.
  • Day-specific edits. Changes made through Edit Vehicle/Route apply to that date only and flag the route as Edited on the board. The underlying zone is unchanged, so tomorrow’s board rebuilds from the original setup.
  • Households move as a unit. Dragging one pet moves every pet at that address on that route — they are a single stop.
  • The board refreshes itself. The daily view re-polls roughly once a minute, so a dispatcher’s screen stays current while drivers update their jobs.

Troubleshooting

  • Issue: A booking isn’t showing up on the daily board. Resolution: Confirm the booking is in Confirmed status for that date — requested and pending bookings are excluded. Also check that the pet’s route is assigned to a vehicle for that day and that no route filter is active in the toolbar.
  • Issue: A stop shows “Geo Location Missing” in red. Resolution: The client’s address has no coordinates, so the stop can’t be mapped or included in optimization. Correct the address on the client’s profile, then reload the board and re-optimize.
  • Issue: Get Optimal Route isn’t in the Options menu. Resolution: It is hidden once every stop on the route is completed. Recalculate ETA only appears after the journey has been started and while stops remain — before that, use Start Journey to get ETAs.
  • Issue: Dragging stops doesn’t work, or stops move accidentally on a tablet. Resolution: On desktop, drag at least a short distance before releasing — a plain click won’t start a drag. On touch devices you must press and hold for about a quarter of a second before dragging; a quick swipe scrolls the list instead, which is intentional.
  • Issue: Optimizing didn’t change the order. Resolution: The current order may already be the fastest. Remember that start and end addresses are fixed and completed stops stay put, so on a route that’s mostly finished there may be nothing left to reorder.

Related Articles

Was This Article Helpful?