Skip to content Skip to main navigation Skip to footer

Setting Up Routes on Collar

Collar Routes helps pet businesses plan pick-up, drop-off and mobile service runs. You start by creating zones (route templates), then link each zone to a vehicle and staff member so stops appear on the daily Routes board. This article walks you through the full set-up.

Prerequisites

  • Collar Routes on your plan. Routes is included in the Business tier and available as an add-on to the Premium tier.
  • Access to Routes in the left-hand sidebar. It is available to every role except Accountants.
  • The services and booking tags you want to use already set up, if you plan to filter which bookings appear on a zone.
  • Staff members available to assign to vehicle routes.

Overview

The Routes section has three tabs:

  • Routes: the daily board.
  • Zones: reusable route templates, each a catchment area covered by a driver or vehicle.
  • Vehicles: your vans.

Zones define which pets and services belong on a run. Vehicles put those zones on the road.

How to Create a Zone

  1. Open Zones. From the left-hand sidebar, open Routes and select the Zones tab.
  2. Start a new zone. Click the (+) button in the top right and choose New Route. The New Route window opens on its Pets tab.
  3. Fill in Settings. Open the Settings tab and complete every field:
    • Route Name: for example “West London – Pick-up”.
    • Zone/Area: pick an existing area, or type a new name (for example “London”) and create it.
    • Sort Index: the order this zone’s route appears on the daily Routes board.
    • Color: shown next to the route on the board.
    • Start Time: for example 08:00 for a morning pick-up run.
    • Job Duration: the typical length of each stop (for example 10). It must be more than 0.
  4. Choose services. Under Services, select the services that should pull pets onto this route when booked (for example Daycare). You need at least one service or Appointment Tag to save.
  5. Optionally add tags. Add Appointment Tags to narrow it further. For example, service Daycare with tag Pick-up means only Daycare bookings with the Pick-up tag appear. If you set both services and tags, a booking must match both.
  6. Add pets. On the Pets tab, add at least one pet and give each pet a job (see below).
  7. Save. Click Save.

How to Add Pets to a Zone

  1. In the zone window, open the Pets tab.
  2. Search by pet name, owner name, email, area code or pet tag. Type at least 3 characters.
  3. Tick the pets you want (or click Select All), then click Add Selected Pets.
  4. Give each pet a default job, for example Pick-up or Drop-off. Choose an existing job, or type a new one to create it. To give several pets the same job, tick them and use Set job for all selected pets.
  5. The number beside each pet sets its order on the run. Collar numbers pets in the order you add them; change the numbers to reorder the stops.

How to Add a Vehicle

Zones alone do not put stops on the daily Routes board. Link each zone to a vehicle so the day’s board can build.

  1. Open Routes, then the Vehicles tab.
  2. Click the (+) button in the top right and choose New Vehicle.
  3. Open the Settings tab and fill in every field:
    • Vehicle Name
    • Vehicle Type (Van or Mini Van)
    • Status (In Service or Out of Service)
    • Plate Number
    • Colour, which identifies the vehicle on the daily board
    • Capacity: pet counts for General, Small, Medium and Large. The General figure is used for the capacity count on the board.

How to Assign Zones to a Vehicle

  1. In the vehicle window, open the Routes tab and click Add New Route.
  2. Select the zone this vehicle should run.
  3. Assign one or more staff under Staff Member.
  4. Optionally set Start Address (Optional) and End Address (Optional). If you leave these blank, Collar uses the branch address.
  5. Repeat for any other zones on the same vehicle, then click Save.

Important Notes, Tips & Warnings

  • Tip: To add a new area, type it in the Zone/Area field on the zone’s Settings tab. There is no separate Area screen.
  • Note: A zone is a template. Its stops only show on the daily Routes board after the zone is added to a vehicle.
  • Note: A stop appears when all of these are true:
    • the pet is on the zone
    • that day’s booking is Confirmed
    • the booking matches the zone’s services and tags (if you set both, both must match)
  • Note: Zones don’t have set weekdays. A zone’s stops appear on any day with a matching booking.
  • Note: A vehicle’s Status is for your reference only. Routes on an Out of Service vehicle still show their stops.
  • Warning: A zone cannot be saved without:
    • all its Settings fields
    • at least one service or Appointment Tag
    • at least one pet with a job
    A vehicle cannot be saved without all its Settings fields and at least one route with a zone and a staff member. Collar doesn’t show an error in these cases; Save simply does nothing.

Troubleshooting

Issue: I can’t find where to add a zone area.
Resolution: Open Routes > Zones > New Route (or edit a zone) > Settings, and select or type a name in the Zone/Area field.

Issue: My zone is saved but nothing appears on the daily Routes board.
Resolution: Check that:

  • the zone is added to a vehicle with Add New Route
  • the pet is on the zone’s Pets list
  • that day’s bookings are Confirmed and match the zone’s services or tags

Issue: I click Save on a zone and nothing happens.
Resolution: Check that:

  • Route Name, Zone/Area, Sort Index, Color, Start Time and Job Duration (above 0) are filled in
  • at least one service or Appointment Tag is selected
  • at least one pet is added and every pet has a job

Issue: I click Save on a vehicle and nothing happens.
Resolution: Fill in all Settings fields, then add at least one route with a zone and at least one staff member. The same zone can’t be added twice to one vehicle.

Related Articles

Was This Article Helpful?