Skip to content Skip to main navigation Skip to footer

Why Can’t I Make Bookings in Collar? (Common Blockers)

If you suddenly can’t create bookings, either for every service or only for clients, the cause is usually one of these:

  • a service setting
  • a schedule with no space left
  • a calendar block
  • a booking rule

Work through this checklist before assuming it is a glitch.

Prerequisites

  • Access to the Collar platform with permission to open Operations (Super Admin, Admin or Support).
  • Know where booking fails:
    • on the platform (staff booking)
    • on the public booking page or website widget
    • in the Collar app

Overview

Bookable times come from the schedule attached to each service. For clients, those times are then limited by:

  • the service’s Availability settings
  • the space left on each day
  • any calendar slots that block availability
  • the service’s Rules (which pets and clients can book)

Staff bookings made in the platform skip most of these limits. If staff can book but clients can’t, the cause is almost always one of the client-side settings below.

Step 1: Confirm Where Booking Fails

  1. Try the same service from New Booking in the platform (for example from the Calendar).
  2. If that works but the public booking page or app does not, focus on Steps 3 to 6. Those settings only limit clients.
  3. If staff can’t book either, focus on Step 2, the Schedule(s) check in Step 3, and the Troubleshooting section.
  4. Note what you see: no times, a greyed-out button, an error banner (copy the exact wording), or a spinner that never finishes.

Step 2: Check the Service Status

  1. Go to Operations > Services.
  2. Open the service and stay on the Details tab.
  3. Under Status, choose Available (shown as “In stock” in the services list).
    • Unavailable blocks new bookings for everyone, including staff (“Some products are out of stock”).
    • Hidden removes the service from your booking page and app, but staff can still book it.
  4. Click Save Changes.
  5. If every service fails, check each one. A shared schedule problem is more likely than every Status changing at once.

Step 3: Check the Availability Settings

  1. Still in the service, open the Availability tab.
  2. Under Schedule(s), confirm at least one schedule is selected. A service can’t be booked without a schedule, by staff or by clients.
  3. Check Availability start date. Clients aren’t offered times before this date.
  4. Check Dynamic end date and Availability end date. These limit how far ahead clients can book in the app and on your booking page. If the end date is in the past, or the dynamic window is very short, clients see nothing.
  5. Check Minimum notice for booking. A higher value (for example several days) hides nearer times from clients.
  6. Check Occupency Blocked by. Schedules listed here use up this service’s spaces when they’re booked.
  7. Click Save Changes.

Step 4: Check the Schedule Itself

  1. Go to Operations > Schedules.
  2. Hover over the schedule attached to the affected service and click the ⋮ icon. The Edit Branch Schedule window opens.
  3. Confirm the session times still exist and that no day’s spaces are set to 0. The space field depends on the schedule type:
    • Single Slot: the number box for each day in each time row, under Sessions.
    • Hybrid: Max under Max availability per day.
    • Boarding: Availability (Number of spaces available per day).
    Clients can’t book a day with 0 spaces.
  4. For Recurring Sessions schedules, review Recurrence Type and Repeats Every so the pattern still offers the days you expect.
  5. For a boarding or hybrid schedule, check:
    • Allowed Check-in Days
    • Allowed Check-out Days
    • Excluded Check-in Dates
    • Excluded Check-out Dates
  6. Click Save if you change anything.

Step 5: Check Calendar Blocks

  1. Open Calendar (Day or Week view).
  2. Look for entries labelled Blocked, or with the title you gave them. These are calendar slots, not a separate closed or holiday shade.
  3. Click the block. If Block Availability is ticked, the Number of Slots to Block is taken off the Schedules listed in the block, so clients can’t book that space.
  4. Edit or delete the block if it should no longer stop bookings.

For the full steps, see How to Block Slots and Days within the Calendar.

Step 6: Check the Rules Tab

  1. Go back to Operations > Services, open the service and select the Rules tab.
  2. Check the pet rules: Max pet count per booking, Allowed pet types, Neutered pets only, Excluded pet breeds and Allow bookings from pets (age). On the booking page, pets that don’t meet them are greyed out.
  3. Check Show when tagged with and Hide when tagged with. These can hide the service from some clients, and from everyone who isn’t logged in.
  4. Check Allow bookings from. If it is set to Pets Subscribed to, only clients with that membership can book. Everyone else sees Requires Membership.
  5. Click Save Changes if you change anything.

Step 7: Rule Out a Local Glitch

  • Browser: log out, hard-refresh (Ctrl+F5 or Cmd+Shift+R), or try a private window.
  • Another device: if one device works and another doesn’t, clear the browser cache or switch browsers.
  • App: force-close and reopen the app. Reinstall only if it still fails after the checks above.

Important Notes, Tips & Warnings

  • Note: Staff bookings on the platform ignore these limits:
    • Availability start date
    • Dynamic end date and Availability end date
    • Minimum notice for booking
    • spaces left on the day
    • calendar blocks
    • the Rules tab
    Staff can book a full slot. If staff can’t book either, check the Status, whether the service has a schedule with times, and whether payments are set up (see Troubleshooting).
  • Warning: There is no field called “Accept bookings up to”. Use Availability end date or Dynamic end date on the service’s Availability tab. The Rules tab controls who can book, not how far ahead.
  • Note: The Staff field on a schedule doesn’t stop bookings when a team member is away. Collar doesn’t check staff availability when offering times.
  • Tip: One schedule can be shared by several services. If every service fails at once, open the shared schedule before editing each service.
  • Note: Team members are managed under Operations > Team, which is visible to Super Admins. There is no Settings > Staff > Capacity tab that turns booking on or off for the branch.

Troubleshooting

Issue: Clients see no times, but staff can still book on the Calendar.
Resolution: Check the service’s Availability tab: Availability start date, Availability end date, Dynamic end date and Minimum notice for booking. Then check the schedule for days with 0 spaces, and the Calendar for blocks with Block Availability ticked.

Issue: Clients see “No slots available for this service with the selected customizations.”
Resolution: No times are left for the choices the client made. Check the schedule’s spaces and any calendar blocks, or ask the client to try another date.

Issue: A client sees “The selected slot is no longer available. Please select a different date or time for your bookings.”
Resolution: The slot filled up while they were booking. Ask them to pick another time, or book it for them from the platform.

Issue: Staff see “Some products are out of stock” when confirming a booking.
Resolution: The service’s Status is Unavailable. Set it to Available and click Save Changes.

Issue: Staff and clients both see “Provider does not accept payments.”
Resolution: Your branch’s Stripe account is not connected or not set up for payments. This blocks every booking, including free ones. Contact [email protected].

Issue: Staff can’t confirm because no time can be selected (“Please select a time”).
Resolution: The service has no schedule with times on that date. Check Schedule(s) on the service’s Availability tab and the session times in Operations > Schedules.

Issue: Clients can’t select the service, or their pet is greyed out.
Resolution: Check the service’s Rules tab (Step 6), including pet rules, tags and Allow bookings from.

Issue: One service fails but the others work.
Resolution: On that service only, confirm that:

  • Status is Available
  • Schedule(s) is set
  • the Availability dates and minimum notice are sensible
  • the Rules tab isn’t excluding the client’s pets

Issue: On a boarding (multi-day) service, clients can pick a check-in date but not a check-out date.
Resolution:

  1. Go to Operations > Schedules and open the boarding schedule.
  2. Under Allowed Check-out Days, tick every day pets can go home. If no check-out day is ticked, clients can’t choose any check-out date.
  3. Check the date isn’t listed under Excluded Check-out Dates.
  4. A day can only be ticked under Allowed Check-in Days or Allowed Check-out Days if it’s ticked in the schedule’s main days row. If you don’t take drop-offs on a day (for example Sunday) but pets still stay or leave then, keep that day ticked in the main row and untick it under Allowed Check-in Days instead.
  5. Every night of the stay also needs a free space.
  6. Click Save, then try the booking again.

Issue: Everything above looks correct and booking still fails.
Resolution: Email [email protected] with:

  • where you book (platform, booking page or app)
  • what you see (exact error text or a screenshot)
  • which services are affected
  • roughly when it started

Related Articles

Was This Article Helpful?